Factors Influencing Measurement and Calibration Uncertainty

By: G. Raymond Peacock, Temperatures.com Inc. – As published in Sensors
sml-mum
This is the third essay in a series expanding on an article I wrote for SensorsMag.com (Oct 23, 2007 ) titled A Twelve-Step Sensor Selection Checklist. This month’s piece deals with the factors that influence measurement and calibration uncertainty.
(Note: It has been modified very slightly to make it more easily read in this format)

Questions
Once you have the measure of a sensor’s calibration uncertainty, the question arises: What happens to measurement performance in terms of overall measurement uncertainty in the real world? This question gives rise to three additional questions:

* What will influence the sensor’s performance?
* How much will it influence it?
* How does the measurement uncertainty combine with the basic calibration uncertainty?

The last one is the easiest to answer. Random errors most often simply combine in quadrature—the square of the overall uncertainties is the sum of the square of its individual component uncertainties. For more details, see NIST’s “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results”.

Answering the first two questions, however, is no trivial matter. Given that many manufacturing and process operations cover large areas in buildings that are neither heated nor cooled, it can be a challenge.

The Systematic Approach
When there is no obvious solution, you have to do the work up front, before the installation, characterizing the likely errors and then seeking a workable, optimized approach that has minimal continuing costs. This means identifying the principle influencing errors and estimating and/or verifying their impact through testing.

Usually, the primary influence is ambient temperature because it can affect the sensitivity of many components in analog and digital circuits. Most manufacturers list the allowed ambient-temperature limits for operation of their devices, but unless the device is covered by a standardized calibration table—such as ASTM E230 for thermocouples and ASTM E1137/E1137M-03 for RTDs—all bets are off as to how a sensor will perform outside its temperature limits. Fortunately, some manufacturers also specify a residual ambient temperature coefficient.

There are many other influencing factors to consider, such as radiant heat load (which will directly influence sensor temperature, not necessarily the ambient surroundings), humidity, moisture, vibration, atmospheric pressure, nuclear or ultraviolet radiation, and the presence of gases. In fact, there are countless influences almost unique in their effect on the sensors. One of the best ways to identify and assess the influence is through your own testing.

An alternative to doing the testing yourself is to hire experienced instrument evaluators, but you’ll have to go to Europe to have it done. I suggest the International Instrument Users’ Association in The Netherlands, SIREP/EI in the U.K., or EXERA in France.

The Brute Force Approach
Sometimes the best way to deal with an ambient-temperature problem is to avoid it completely. Simply create artificial calibration conditions around the sensor so there is no discernible influence from the operating environment.

You often see this is with sensitive online devices (e.g., optical sensors) in industrial plants. These devices are mounted inside protective, cooled, and sometimes-heated enclosures, with air purges.

This brute-force approach enables you to get the best possible measurement performance from the sensor. In some applications—such as petrochemical plants, power plants, and high-temperature processing lines—it’s the only viable solution for many types of sensors.

There is, however, a price for this level of control. In addition to the extra equipment and installation costs, the process maintenance staff is faced with ongoing preventive work and costs to keep the protective gear, as well as the sensitive sensors, operating within allowed limits.

Safety Problems?
If your proposed sensing application involves potentially hazardous conditions—such as highly corrosive or flammable liquids, gases, or powders and high-voltage electrical circuits—there are special conditions that affect more than the sensor—they affect literally everything you do and every choice you make.

Check the appropriate codes and environment standards to be sure that your sensors and their interface electronics comply with mandates such as the National Electrical Code Article 500 and the Canadian Electrical Code 22.2. To learn more about safety standards, take a look at the Sensors article by Dave Wilson “Let’s Clear the Air on Hazardous Location Requirements and Codes” and the ISA-84 process safety standards reference, available on CD-ROM from the ISA Bookstore.

In Closing
Next time, I’ll help you with some ideas on the first pass at vendor selection. Price isn’t everything. Plus, you don’t buy from the first or last salesperson to come through your door. There’s more to it than that.

See you soon.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>